location: Diff for "Windows2016"

Institute of Mathematics - PublicMathWiki:

Differences between revisions 7 and 67 (spanning 60 versions)
Revision 7 as of 2014-04-02 13:08:33
Size: 2528
Editor: raos
Comment:
Revision 67 as of 2020-07-10 07:02:56
Size: 4215
Editor: daschil
Comment:
Deletions are marked like this. Additions are marked like this.
Line 1: Line 1:
= Windows 2012 = ## page was renamed from Windows2012
= Windows 2016 =
Line 7: Line 8:
If your IMATH account has been created before March, 1st 2014, you have to synchronize the Windows password for Windows 2012 before you can log in. This has to be done only once per account. If your IMATH account has been created before March 1st, 2014, you have to synchronize the Windows password for Windows 2016 before you can log in. This has to be done only once per account.
Line 16: Line 17:
Once you finished above steps, your password has been synchronized and you can log into Windows 2012 using your IMATH account. Once you finished above steps, your password has been synchronized and you can log into Windows 2016 using your IMATH account.
Line 20: Line 21:
Click on the Windows logo in the lower left hand corner (circled red below)  1. Click on the Windows logo in the lower left hand corner
 1. You will see the Start Screen with a limited set of applications as shown below
 1. By scrolling on downwards you will find all applications
Line 22: Line 25:
{{attachment:startscreenbutton.png}}

You will see the Start Screen with a limited set of applications as shown below

{{attachment:moreprograms.png}}

By clicking on the arrow pointing downwards in the lower left hand corner (circled red in the above screen shot), the view will switch and show all applications (following screen shots)

{{attachment:allprograms.png}}
{{attachment:win2016_apps.png}}
Line 48: Line 43:
In order to sign out/log out, i.e. close all programs and end the sessions, click on the Start Button In order to sign out/log out, i.e. close all programs and end the sessions
Line 50: Line 45:
{{attachment:startscreenbutton.png}}  1. click on the Start Button
 1. then click on the personalized icon (left side, see pink arrow)
 1. a drop down list appears. Click on '''Sign out'''.
Line 52: Line 49:
and click on your name in the upper right hand corner (screen shot below) {{attachment:win2016_windows_sign_out.png}}
Line 54: Line 51:
{{attachment:signout.png}} == Printer ==
all Institute printers should be automatically mapped to your windows session.
Line 56: Line 54:
a drop down list appears. Click on '''Sign out'''. 1. Trouble shooting

in case your selected printer disappeared after you disconnect/ reconnect your session
 * please perform a logout from your windows session [[https://wiki.math.uzh.ch/public/Windows2012#Sign_Out.2FLog_Out]]
 * You don’t need to perform the steps below as your (default)printer will be mapped after a fresh login again

== define your default printer ==
at first start-up please define you default printer as follow
 * click in on the windows icon and type "devices"

{{attachment:win2016_printer_device.png}}

 * navigate to "Printers & Scanners"
 * Select your required Printer and click on "Manage"

{{attachment:win2016_printer_choose.png}}

 * click "Set as default" to assign this printer as default printer for all your applications

{{attachment:win2016_printer_setdefault.png}}
Line 60: Line 77:
Windows 2012 allows for easy side-by-side alignment of windows: Windows 2016 allows for easy side-by-side alignment of windows:
Line 63: Line 80:
 2. press the Diamond key (adjacent to the Space bar) and keep it pressed. Then press the Cursor Left key. The window will be aligned to the left side of the screen  2. press the "Windows" key (left/right and near the Space bar) and keep it pressed. Then press the Cursor Left key. The window will be aligned to the left side of the screen
Line 65: Line 82:
 4. press the Diamond key and keep it pressed. Then press the Cursor Right key. Both windows are now aligned side-by-side (see below for example)  4. press the Windows" key and keep it pressed. Then press the Cursor Right key. Both windows are now aligned side-by-side (see below for example)
Line 71: Line 88:
Currently, sound and video is not working. Sound and video is working, but performance may depends on the current bandwidth available

== USB sticks ==
 * If you plug in a USB Stick at the terminal, there is '''no window''', which opens automatically.
 * Plugged in USB sticks or ext. Harddrives will appear in your home-directory under the folder '''thindrives'''.
 * Open a 'explorer' and navigate to '''this PC -> media on ThinLinc '''
 * Mount and unmount happens automatically - wait a few seconds.
 * If you copy data, wait until the light on the USB stick '''stops''' flashing or the '''progress bar''' disappear, plus some additional seconds. After that, it's secure to remove the stick.
 * If the stick does not appear under directory 'media on ThinLinc', please trigger a remount via menu on your Thinlinc Terminal (not on Windows) '''Applications > System Tools > Repair thindrives (USB Stick , ...) '''.
 * Note: on the Thinstations (they have a an orange startup screen) the USB Stick mount is not yet support

Windows 2016

First Time Login

If your IMATH account has been created before March 1st, 2014, you have to synchronize the Windows password for Windows 2016 before you can log in. This has to be done only once per account.

Follow the steps below in order to synchronize the password:

  1. go to https://www.math.uzh.ch/newpw

  2. enter your user name and password for your IMATH account, and press Login

  3. check the option Keep my old password and leave the fields New password and Retype new password empty.

  4. press Set password. It may take up to 60 seconds for the change to happen.

Once you finished above steps, your password has been synchronized and you can log into Windows 2016 using your IMATH account.

Where are the Applications?

  1. Click on the Windows logo in the lower left hand corner
  2. You will see the Start Screen with a limited set of applications as shown below
  3. By scrolling on downwards you will find all applications

win2016_apps.png

Where are the Files?

Start Windows Explorer (circled red)

explorer.png

Your personal data is in homes (circled red below)

explorerhomes.png

Shared data on Scratch is in Scratch (S:)

explorerscratch.png

Sign Out/Log Out

In order to sign out/log out, i.e. close all programs and end the sessions

  1. click on the Start Button
  2. then click on the personalized icon (left side, see pink arrow)
  3. a drop down list appears. Click on Sign out.

win2016_windows_sign_out.png

Printer

all Institute printers should be automatically mapped to your windows session.

1. Trouble shooting

in case your selected printer disappeared after you disconnect/ reconnect your session

define your default printer

at first start-up please define you default printer as follow

  • click in on the windows icon and type "devices"

win2016_printer_device.png

  • navigate to "Printers & Scanners"

  • Select your required Printer and click on "Manage"

win2016_printer_choose.png

  • click "Set as default" to assign this printer as default printer for all your applications

win2016_printer_setdefault.png

Arange Windows Side-by-Side

Windows 2016 allows for easy side-by-side alignment of windows:

  1. click on the first window to be aligned
  2. press the "Windows" key (left/right and near the Space bar) and keep it pressed. Then press the Cursor Left key. The window will be aligned to the left side of the screen
  3. click on the second window to be aligned
  4. press the Windows" key and keep it pressed. Then press the Cursor Right key. Both windows are now aligned side-by-side (see below for example)

side-by-side.png

Sound and Video

Sound and video is working, but performance may depends on the current bandwidth available

USB sticks

  • If you plug in a USB Stick at the terminal, there is no window, which opens automatically.

  • Plugged in USB sticks or ext. Harddrives will appear in your home-directory under the folder thindrives.

  • Open a 'explorer' and navigate to this PC -> media on ThinLinc

  • Mount and unmount happens automatically - wait a few seconds.
  • If you copy data, wait until the light on the USB stick stops flashing or the progress bar disappear, plus some additional seconds. After that, it's secure to remove the stick.

  • If the stick does not appear under directory 'media on ThinLinc', please trigger a remount via menu on your Thinlinc Terminal (not on Windows) Applications > System Tools > Repair thindrives (USB Stick , ...) .

  • Note: on the Thinstations (they have a an orange startup screen) the USB Stick mount is not yet support

PublicMathWiki: Windows2016 (last edited 2021-12-03 07:30:19 by crose)