Printing at the institute

Via Notebook / Desktop

• booklet
• linux
• mac
• windows

• UZH Printplus (UPP)

  • Homepage

  • UPP Printer install

  • Recharge credit

Overview

All printers of the institute are connected to a central print server, which logs and counts all print jobs. Before a print is sent to a printer, the system gets the page number and job settings, calculates the costs and checks permissions and credits for the sender. After a successful printing, the credits will be subtracted.

* Members of the institute are: Professors, Staff, Assistants (PostDocs and PhDs), Guests.
** Assistants need to refill the credit (for free) after printing 100 colored pages per semester.
*** Students with 'Hauptfach Mathematik' or "Hauptfach Bio Statistic" get free credits worth 20 SFr. per semester. An I-MATH account is required to print.

A printjob is counted based on page number, page format (A4 or A3), simplex or duplex and black/white or color. Special settings like A3, color or stapling are only available on some special printers like jcolor, k.

Prices for all printers with different settings!

Printing 'I-MATH' vs. 'UZH Printplus (UPP)'

At the institute there are two printing solutions available: 'I-MATH'-based and 'UZH Printplus (UPP)'-based.

Check your current print credit

• log in to http://www.math.uzh.ch/my

• Switch to the printing tab
• You will see the current amount of credit you have left and your own print history.

Charging Credit

You can view your credit, your settings and your last 50 print jobs in your account admin panel: My Math.
Users can charge credits at the office Y27K30. The credit can be used immediately.
Assistants can also write an email to the system support, but in this case probably have to wait some time until the credit is loaded up.

Printer Names

• Printers are named after the room they are in.
• For the big printers on corridors of J and K floors several virtual printers with various configurations are provided .

Public printers

Printing from your notebook

Please review the specific page:

• Windows: Manual

• Mac OS X: Manual

• Linux: Manual

You can also use our thinlinc client to connect to our enviroment where everything is set up already.

For additional information about how to connect to our servers from your computer or how to transfer data from your device to our thinlinc servers go to https://wiki.math.uzh.ch/public/thinlinc

Printing on Group-Accounts

People, who are assigned to a group (made by the IT), can print on this group account. All members of the group have a link on the myMath Homepage, where they can see the Print-History of the group.

For printing on a group account, a job-billing information has to be sent with the print job. In many print dialogs (for example: Firefox) you have in the tab 'Job' in the section 'Job Details' a field 'Billing info'. There you must enter the group name (all lowercase) to print on the group account. In other print dialogs (especially the gtklp dialog) you have in the tab 'Special' the field 'Extra Options'. There you must type: job-billing=<group> where '<group>' is again the lowercase group name you wish to print on. On a console (with lp command) you can use the option -o job-billing=<group> for printing on a group account.

If you have problems with printing on a group account, please come to J11 or J40.

Create own printer instances

Create own printer instances with personal settings. Such instances are only available via command line.

[user@host
# Create an instance 'jcolor/bw', which prints to 'jcolor', but always in b/w:
$ lpoptions -p jcolor/bw -o ColorModel=Gray

# To use the new instance:
$ lp -d jcolor/bw output.pdf

# Show all printer, incl. instances:
$ lpstat -t

# The local instances are saved under
~/.cups/lpoptions

Printing with Command Line

Note 1: Pay attention on combining copies and stapling. If you like to print a PDF (e.g. 4 pages) 10 times, do NOT use the -n <number> parameter. The whole printjob, 4 pages * 10 copies, will be stapled together (only one)!

Solution: Use the 'Repeat Job' option in the advanced tab of the print dialog

Note 2: Do not print many copies at once, because it requires a lot of resources of the printer.

Solution: Use the lpRepeat script instead (with the -s parameter to specify a delay):

• $ lpRepeat -d h52 -n 30 -s 15 big_file.pdf

Option values

Duplex: one/two sided print

StaplePos: staple position

Printing with graphical interface (evince PDF viewer)

Stapling

In the print preview dialog select j, jcolor, k, or kcolor and go to tab 'Advanced' to activate stapling.

This will put one staple in the upper left corner of your Document.

Booklet

In the print preview dialog select jcolor_booklet or kcolor_booklet - these printers are already configured for booklet printing.

Alternatively, select j, jcolor, k, or kcolor and choose the following options:

1. Left binding for Booklet Printing on the tab Finishing

2. Saddle Stitch for Staple Position on the tab Advanced

Note: booklet printing requires A4 or A5 format.

Printing exams - lpSequential

If you have a personalized exam, one PDF for all students, and you like to print it and the output should be:

• shifted (easy separation), or
• stapled,

than use the lpSequential script (commandline).

• For each exam print, the current page number is shown.
• You can stop a running print job, by pressing Ctrl-C in the commandline.
• If you stopped the printing, restart the printjob by specifing the last printed page + 1.

• <printer>: a printer name like k, kcolor, j, or jcolor.

• <pages per exam>: If you have an exam pdf with 200 pages (one big file, 25 students, 8 pages per exam) the whole file will be split in jobs as <pages per exam> and such part will be printed.

• <start page to print from>: '1', if you start from scratch, else the last reported printed page + 1.

• <delay in seconds>: This is only necessary if you want to be sure that all exams are in exact same order as in the PDF. A reordering might appear inside the printer, if there are multiple print jobs at the same time in the local printer queue. If a delay is specified, this helps to take care that are never more than 2 jobs in the local printer queue at the same time. The amount of delay in seconds depends on the print job size. Start with 5 seconds and stop and increase if it is too short. You can check the local printer queue on the touchscreen at the copier.

# K Floor (k)
$ lpSequential -o Duplex=None -o StaplePos=1PLU -o StapleType=StapleON -o sides=one-sided <file.pdf> k <pages per exam> <start page to print from> <delay in seconds>
# J Floor (jcolor_booklet) - with color
$ lpSequential -o Duplex=None -o StaplePos=1PLU -o StapleType=StapleON -o sides=one-sided -o print-color-mode=Color <file.pdf> jcolor <pages per exam> <start page to print from> <delay in seconds>

Example:

• Most exams are single sided, so switch of the default Duplex mode.

Poster Printing (large)

• Poster printing are done via the 'Print Publish' Center of the ETHZ: https://www.print-publish.ethz.ch/

• https://ethz.ch/staffnet/en/service/office-supplies-printing-and-mailing/print-publish.html > Self-Service Printing > Large format printing