6952
Comment:
|
6550
|
Deletions are marked like this. | Additions are marked like this. |
Line 5: | Line 5: |
* Other UZH members are welcome to contact support@math.uz.ch. | * Other UZH members are welcome to contact support@math.uz.ch . |
Line 7: | Line 7: |
Line 11: | Line 10: |
* Longer (>1day) are reccomended to do reservation. | * Longer (>1day) are reccomended to be done with a reservation. |
Line 13: | Line 12: |
* With reservation: In case of maintenance need, we typically schedule the maintenance according the needs of the user. | * With reservation: In case of maintenance need, we typically schedule the maintenance according to the needs of the user. |
Line 15: | Line 14: |
* General: if we see running computations, we always contact the user first (independent if a reservation exist). If the user doesn't answer (weekend, holiday, ...) we decide by our own what to do. |
* General: if we see running computations, we always contact the user first (independent of whether or not a reservation exists). If the user doesn't answer (weekend, holiday, ...) we decide on our own what to do. |
Line 24: | Line 23: |
||<rowbgcolor="#dddddd"> host || CPU type || cores || RAM || local disk || date || purpose || CPU specs || || asprey || 2 x Intel Xeon 4C E5-2643 3.30 GHz || 16 (HT enabled) || 128 GB || 73 GB || 12/2012 || student: matlab, mathematica, maple, R || [[http://ark.intel.com/products/64587/Intel-Xeon-Processor-E5-2643-10M-Cache-3_30-GHz-8_00-GTs-Intel-QPI|E5-2643]] || || crous || 8 x Intel Xeon 10C E7-2850 2.0 GHz || 80 (HT disabled) || 2 TB || 300 GB || 05/2013 || research || [[http://ark.intel.com/products/53573/Intel-Xeon-Processor-E7-2850-24M-Cache-2_00-GHz-6_40-GTs-Intel-QPI?wapkw=e7-2850|E7-2850]] || || david || " || " || " || " || " || magma host (temporary) || " || || estonia0 || 2 x Intel Xeon 6C E5-2640 2.50 GHz || 12 (HT disabled) || 256 GB || 2TB || 05/2013 || research || [[http://www.intel.com/buy/us/en/product/components/intel-xeon-processor-e5-2640-15m-cache-250-ghz-720-gts-intel-qpi-250678?wapkw=e5-2640#tech_specs|E5-2640]] || || estonia1 || " ||" || " || " || " || " || " || || estonia2 || " || " || " || " || " || " || " || || estonia3 || " || " || " || " || " || " || " || || georgia0 || " || " || " || " || " || " || " || || georgia1 || " || " || " || " || " || " || " || || georgia2 || " || " || " || " || " || " || " || || georgia3 || " || " || " || " || " || " || " || || iran0 || " || " || " || " || " || " || " || || iran1 || " || " || " || " || " || " || " || || iran2 || " || " || " || " || " || " || " || || iran3 || " || " || " || " || " || " || " || || jordan0 || " || " || " || " || " || professor & assistant: matlab, mathematica, maple, R || " || || jordan1 || " || " || " || " || " || " || " || || jordan2 || " || " || " || " || " || courses || " || || jordan3 || " || " || " || " || " || courses || " || || brady || 1 x Intel Core 6C i7-8700K 3.70GHz ||12 (HT enabled) || 64GB || 80GB,2TB || 02/2018 || || [[https://www.intel.com/content/www/us/en/products/processors/core/i7-processors/i7-8700k.html|i7-8700K]] || |
||<rowbgcolor="#dddddd">Host ||CPU type ||Cores ||RAM ||Local disk ||Purchase || Purpose ||CPU specs || OS || ||rambo|| 1 x AMD EPYC 7742 2,25GHz ||64 (HT enabled ) || 512GB || 240GB, 2TB || 08/2021 ||research ||[[https://www.amd.com/de/products/cpu/amd-epyc-7742|AMD-EPYC-7742]] || Ubuntu 22.04 || ||olive|| 1 x AMD EPYC 7502P 2,5GHz ||32 (HT enabled ) || 512GB || 240GB || 04/2022 ||research ||[[https://www.amd.com/de/products/cpu/amd-epyc-7502p|AMD-EPYC-7502P]] || Ubuntu 22.04 || ||oja|| " ||" || " || " || " ||" ||" || Ubuntu 20.04 || ||stokes|| " ||" || " || " || " ||" ||" || Ubuntu 22.04 || ||walker|| " ||" || " || " || " ||student ||" || Ubuntu 22.04 || === CPU === ||<rowbgcolor="#dddddd">Host ||CPU type ||Cores ||RAM ||Local disk ||Purchase || Purpose ||CPU specs || OS || ||brady ||1 x Intel Core 6C i7-8700K 3.70GHz ||12 (HT enabled) ||64GB ||80GB,2TB ||02/2018 || research ||[[https://www.intel.com/content/www/us/en/products/processors/core/i7-processors/i7-8700k.html|i7-8700K]] || Ubuntu 22.04 || === GPU === ||<rowbgcolor="#dddddd">Host ||GPU model ||VRAM ||Recommended PSU ||Purchase || Purpose ||GPU Specs || OS || ||david ||Gigabyte GeForce GTX 1070 G1 Gaming ||8GB ||500W ||" || research ||[[https://www.gigabyte.com/de/Graphics-Card/GV-N1070G1-GAMING-8GD-rev-10/sp#sp|GTX-1070]] || Ubuntu 22.04 || === Old === ||<rowbgcolor="#dddddd">Host ||CPU type ||Cores ||RAM ||Local disk ||Purchase || Purpose ||CPU specs || OS || ||david ||8 x Intel Xeon 10C E7-2850 2.0 GHz ||80 (HT disabled) ||2 TB ||300 GB ||05/2013 ||research ||[[http://ark.intel.com/products/53573/Intel-Xeon-Processor-E7-2850-24M-Cache-2_00-GHz-6_40-GTs-Intel-QPI?wapkw=e7-2850|E7-2850]] || Ubuntu 22.04 || ||estonia0 ||2 x Intel Xeon 6C E5-2640 2.50 GHz ||12 (HT disabled) ||256 GB ||2TB ||05/2013 ||research ||[[http://www.intel.com/buy/us/en/product/components/intel-xeon-processor-e5-2640-15m-cache-250-ghz-720-gts-intel-qpi-250678?wapkw=e5-2640#tech_specs|E5-2640]] || Ubuntu 22.04 || ||estonia1 ||" ||" ||" ||" ||" ||" ||" || Ubuntu 22.04 || ||estonia2 ||" ||" ||" ||" ||" ||" ||" || Ubuntu 22.04 || ||estonia3 ||" ||" ||" ||" ||" ||" ||" || Ubuntu 22.04 || ||georgia0 ||" ||" ||" ||" ||" ||" ||" || Ubuntu 22.04 || ||georgia1 ||" ||" ||" ||" ||" ||" ||" || Ubuntu 22.04 || ||georgia3 ||" ||" ||" ||" ||" ||" ||" || Ubuntu 22.04 || ||iran0 ||" ||" ||" ||" ||" ||" ||" || Ubuntu 22.04 || ||iran1 ||" ||" ||" ||" ||" ||" ||" || Ubuntu 22.04 || ||iran2 ||" ||" ||" ||" ||" ||" ||" || Ubuntu 22.04 || ||iran3 ||" ||" ||" ||" ||" ||" ||" || Ubuntu 22.04 || ||jordan0 ||" ||" ||" ||" ||" ||professor & assistant: matlab, mathematica, maple, R ||" || Ubuntu 22.04 || ||jordan1 ||" ||" ||" ||" ||" ||" ||" || Ubuntu 22.04 || ||jordan2 ||" ||" ||" ||" ||" ||courses ||" || Ubuntu 22.04 || ||jordan3 ||" ||" ||" ||" ||" ||courses ||" || Ubuntu 22.04 || |
Line 47: | Line 62: |
Line 50: | Line 64: |
* Use [[thinlinc]] * matlab, mathematica, maple, R, rstudio: just start the application via menu 'Applications > Science > ...' - you'll automatically redirected to the appropriate compute server. * For non standard compute software please first log on the compute node via 'ssh', than start the program. * SSH: Log on 'ssh.math.uzh.ch' and jump to the compute node again via 'ssh'. |
* Use [[thinlinc]] * matlab, mathematica, maple, R, rstudio: just start the application via menu 'Applications > Science > ...' - you'll automatically be redirected to the appropriate compute server. * For non standard compute software please first log on the compute node via 'ssh', then start the program. * SSH: Log onto 'ssh.math.uzh.ch' and jump to the compute node again via 'ssh'. |
Line 57: | Line 71: |
* Very very limited software might be installed on some Windows virtual machines. | * Very very limited software might be installed on some Windows virtual machines. |
Line 60: | Line 74: |
* If you need more disk space, please contact support@math.uzh.ch. | * If you need more disk space, please contact support@math.uzh.ch . |
Line 69: | Line 83: |
* Please report missing or outdated software or wishes to support@math.uzh.ch. * There is no Intel C or Fortran Compiler. * If you need other program versions than the default one: open a terminal, type the program name followed by two 'TAB' presses: this will show all available versions of the specified program. |
* Please report missing or outdated software or wishes to support@math.uzh.ch . * There is no Intel C or Intel Fortran Compiler. * If you need other program versions than the default one: open a terminal, type the program name followed by two 'TAB' presses: this will show all available installed versions of the specified program. |
Line 77: | Line 91: |
* Some programs, like `matlab`, offers limited builtin auto parallelization. * All of the compute nodes are shared memory machines. It's reasonable to start as many programs in parallel as long the `load` is less or equal the number of cores. * Determine the load by using the command `uptime` via a terminal. The last three numbers are the average number of jobs (=load) in the run queue over the last 1, 5 and 15 minutes. {{{ |
* Some programs, like `matlab`, offer limited built-in auto parallelization. * All of the compute nodes are shared memory machines. It's reasonable to start as many programs in parallel as long the `load` is less or equal the number of cores. * Determine the load by using the command `uptime` via a terminal. The last three numbers are the average number of jobs (=load) in the run queue over the last 1, 5 and 15 minutes. {{{ |
Line 85: | Line 100: |
Line 87: | Line 101: |
* Soft: 64GB * Hard: unlimited |
* Soft: 64GB * Hard: unlimited |
Line 90: | Line 104: |
* Soft: 2048 * Hard: 4096 |
* Soft: 2048 * Hard: 4096 |
Line 94: | Line 108: |
Line 98: | Line 113: |
* Be aware to increase a hard limit only one time. If you try to increase it a second time, you'll get an error. You have to log out and log in again to get a new chance. | * Make sure to increase a hard limit only one time. If you try to increase it a second time, you'll get an error. You have to log out and log in again to get a new chance. |
Compute Resources
Contents
- In general, the offers are limited to members of I-MATH and their students.
Other UZH members are welcome to contact support@math.uz.ch .
First time user: contact support@math.uzh.ch first.
Reservations
Short (<1day) computations don't need a reservation,
Longer (>1day) are reccomended to be done with a reservation.
- With reservation: In case of maintenance need, we typically schedule the maintenance according to the needs of the user.
- Without reservation: We try to contact the user and wait several hours for an answer.
- General: if we see running computations, we always contact the user first (independent of whether or not a reservation exists). If the user doesn't answer (weekend, holiday, ...) we decide on our own what to do.
Offers
- For small / ad hoc computations, just start the compute software via the thinlinc environment.
For medium computations, please contact support@math.uzh.ch to ask for the best fitting possibilty and to reserve nodes.
For large computations and professional support please check http://www.s3it.uzh.ch/.
Resources at IMATH
Host |
CPU type |
Cores |
RAM |
Local disk |
Purchase |
Purpose |
CPU specs |
OS |
rambo |
1 x AMD EPYC 7742 2,25GHz |
64 (HT enabled ) |
512GB |
240GB, 2TB |
08/2021 |
research |
Ubuntu 22.04 |
|
olive |
1 x AMD EPYC 7502P 2,5GHz |
32 (HT enabled ) |
512GB |
240GB |
04/2022 |
research |
Ubuntu 22.04 |
|
oja |
" |
" |
" |
" |
" |
" |
" |
Ubuntu 20.04 |
stokes |
" |
" |
" |
" |
" |
" |
" |
Ubuntu 22.04 |
walker |
" |
" |
" |
" |
" |
student |
" |
Ubuntu 22.04 |
CPU
Host |
CPU type |
Cores |
RAM |
Local disk |
Purchase |
Purpose |
CPU specs |
OS |
brady |
1 x Intel Core 6C i7-8700K 3.70GHz |
12 (HT enabled) |
64GB |
80GB,2TB |
02/2018 |
research |
Ubuntu 22.04 |
GPU
Host |
GPU model |
VRAM |
Recommended PSU |
Purchase |
Purpose |
GPU Specs |
OS |
david |
Gigabyte GeForce GTX 1070 G1 Gaming |
8GB |
500W |
" |
research |
Ubuntu 22.04 |
Old
Host |
CPU type |
Cores |
RAM |
Local disk |
Purchase |
Purpose |
CPU specs |
OS |
david |
8 x Intel Xeon 10C E7-2850 2.0 GHz |
80 (HT disabled) |
2 TB |
300 GB |
05/2013 |
research |
Ubuntu 22.04 |
|
estonia0 |
2 x Intel Xeon 6C E5-2640 2.50 GHz |
12 (HT disabled) |
256 GB |
2TB |
05/2013 |
research |
Ubuntu 22.04 |
|
estonia1 |
" |
" |
" |
" |
" |
" |
" |
Ubuntu 22.04 |
estonia2 |
" |
" |
" |
" |
" |
" |
" |
Ubuntu 22.04 |
estonia3 |
" |
" |
" |
" |
" |
" |
" |
Ubuntu 22.04 |
georgia0 |
" |
" |
" |
" |
" |
" |
" |
Ubuntu 22.04 |
georgia1 |
" |
" |
" |
" |
" |
" |
" |
Ubuntu 22.04 |
georgia3 |
" |
" |
" |
" |
" |
" |
" |
Ubuntu 22.04 |
iran0 |
" |
" |
" |
" |
" |
" |
" |
Ubuntu 22.04 |
iran1 |
" |
" |
" |
" |
" |
" |
" |
Ubuntu 22.04 |
iran2 |
" |
" |
" |
" |
" |
" |
" |
Ubuntu 22.04 |
iran3 |
" |
" |
" |
" |
" |
" |
" |
Ubuntu 22.04 |
jordan0 |
" |
" |
" |
" |
" |
professor & assistant: matlab, mathematica, maple, R |
" |
Ubuntu 22.04 |
jordan1 |
" |
" |
" |
" |
" |
" |
" |
Ubuntu 22.04 |
jordan2 |
" |
" |
" |
" |
" |
courses |
" |
Ubuntu 22.04 |
jordan3 |
" |
" |
" |
" |
" |
courses |
" |
Ubuntu 22.04 |
Concept
Access
The compute nodes can be accessed by SSH only from inside I-MATH.
Use thinlinc
matlab, mathematica, maple, R, rstudio: just start the application via menu 'Applications > Science > ...' - you'll automatically be redirected to the appropriate compute server.
- For non standard compute software please first log on the compute node via 'ssh', then start the program.
- SSH: Log onto 'ssh.math.uzh.ch' and jump to the compute node again via 'ssh'.
Operating System
- Ubuntu LTS (Linux) - all compute servers.
- Very very limited software might be installed on some Windows virtual machines.
Storage
If you need more disk space, please contact support@math.uzh.ch .
- Remote (NFS)
- Personal Home directory
/compute/<account>
- Local
/export/user/<account>
Programs / Software
- All compute servers use the same applications and versions as installed on the thinlinc terminals.
Please report missing or outdated software or wishes to support@math.uzh.ch .
- There is no Intel C or Intel Fortran Compiler.
- If you need other program versions than the default one: open a terminal, type the program name followed by two 'TAB' presses: this will show all available installed versions of the specified program.
Parallel computing
- Cluster software
- Not installed / offered at I-MATH.
- Various MPI packages and libs are installed. Compiling and preparation to run programs later on a distributed compute cluster are possible.
Some programs, like matlab, offer limited built-in auto parallelization.
All of the compute nodes are shared memory machines. It's reasonable to start as many programs in parallel as long the load is less or equal the number of cores.
Determine the load by using the command uptime via a terminal. The last three numbers are the average number of jobs (=load) in the run queue over the last 1, 5 and 15 minutes.
$ uptime 15:55:20 up 22 days, 24 min, 1 user, load average: 11.97, 11.73, 11.62
Limitations
- Memory
- Soft: 64GB
- Hard: unlimited
- Number of processes per user
- Soft: 2048
- Hard: 4096
- Change limitations
$ ulimit -m unlimited $ ulimit -u 4096
- Make sure to increase a hard limit only one time. If you try to increase it a second time, you'll get an error. You have to log out and log in again to get a new chance.