location: Diff for "Windows2016"

Institute of Mathematics - PublicMathWiki:

Differences between revisions 19 and 73 (spanning 54 versions)
Revision 19 as of 2019-03-27 08:41:32
Size: 3353
Editor: daschil
Comment:
Revision 73 as of 2024-03-27 11:22:45
Size: 4861
Editor: alrutz
Comment:
Deletions are marked like this. Additions are marked like this.
Line 1: Line 1:
= Windows 2012 =
## page was renamed from Windows2012
= Windows 2016 =
Line 6: Line 6:

If your IMATH account has been created before March 1st, 2014, you have to synchronize the Windows password for Windows 2012 before you can log in. This has to be done only once per account.
If your IMATH account has been created before March 1st, 2014, you have to synchronize the Windows password for Windows 2016 before you can log in. This has to be done only once per account.
Line 11: Line 10:
 1. go to [[https://www.math.uzh.ch/newpw]]  1. go to https://www.math.uzh.ch/newpw
Line 16: Line 15:
Once you finished above steps, your password has been synchronized and you can log into Windows 2012 using your IMATH account. Once you finished above steps, your password has been synchronized and you can log into Windows 2016 using your IMATH account.
Line 19: Line 18:

Click on the Windows logo in the lower left hand corner (circled red below)

{{attachment:startscreenbutton.png}}

You will see the Start Screen with a limited set of applications as shown below


By clicking on the arrow pointing downwards in the lower left hand corner (circled red in the above screen shot), the view will switch and show all applications (following screen shots)
 1. Click on the Windows logo in the lower left hand corner
 1. You will see the Start Screen with a limited set of applications as shown below
 1. By scrolling on downwards you will find all applications
Line 32: Line 25:
Line 35: Line 27:
{{attachment:explorer.png}} {{attachment:2.png}}
Line 37: Line 29:
Your personal data is in '''homes''' (circled red below) Your personal data (home) is in '''\\peuler2\<shortname>'''
Line 39: Line 31:
{{attachment:explorerhomes.png}} Double-click the Path bar and insert the above. Note that <shortname> needs to be replaced with your shortname. (circled red below)
Line 41: Line 33:
Shared data on Scratch is in '''Scratch (S:)'''
attachment:win2016_printer_setdefault.png
{{attachment:explorerscratch.png}}
{{attachment:3.png}}

Shared data on Scratch is in '''\\peuler2\s'''

{{attachment:4.png}}

'''__How to lock your Home aswell as the shared folder in place__'''

Right-click Network and press "Map network drive":

{{attachment:5.png}}

'''__Shared Folder__'''

Set '''S:''' as the Drive name and insert '''\\peuler2\s'''

{{attachment:6.png}}

'''__Home Folder__'''

Set '''L:''' as the Drive name and insert '''\\peuler2\<shortname>'''

{{attachment:7.png}}

Once done, it should look like this:

{{attachment:9.png}}
Line 46: Line 62:
In order to sign out/log out, i.e. close all programs and end the sessions
Line 47: Line 64:
In order to sign out/log out, i.e. close all programs and end the sessions, click on the Start Button  1. click on the Start Button
 1. then click on the personalized icon (left side, see pink arrow)
 1. a drop down list appears. Click on '''Sign out'''.
Line 49: Line 68:
{{attachment:startscreenbutton.png}}

and click on your name in the upper right hand corner (screen shot below)

{{attachment:signout.png}}

a drop down list appears. Click on '''Sign out'''.

== Arange Windows Side-by-Side ==

Windows 2012 allows for easy side-by-side alignment of windows:

 1. click on the first window to be aligned
 2. press the Diamond key (adjacent to the Space bar) and keep it pressed. Then press the Cursor Left key. The window will be aligned to the left side of the screen
 3. click on the second window to be aligned
 4. press the Diamond key and keep it pressed. Then press the Cursor Right key. Both windows are now aligned side-by-side (see below for example)

{{attachment:side-by-side.png}}

== Sound and Video ==

Currently, sound and video is working, but performance depends on the current bandwidth available
{{attachment:win2016_windows_sign_out.png}}
Line 73: Line 71:
all Institute printers should be automatically mapped to your windows session.
Line 74: Line 73:
 * Instistute printers are automatlicl added to your winwdows sesssion
 * at first start-up please define you default printer as follow
1. Trouble shooting

in case your selected printer disappeared after you disconnect/ reconnect your session

 * please perform a logout from your windows session https://wiki.math.uzh.ch/public/Windows2012#Sign_Out.2FLog_Out
 * You don’t need to perform the steps below as your (default)printer will be mapped after a fresh login again

== define your default printer ==
at first start-up please define you default printer as follow

 * click in on the windows icon and type "devices"
Line 88: Line 96:
 1. Trouble shooting
 * in case your selected printer disappeared after you disconnect/ reconnect your session
 * please perform a logout from your windows session
 * you dont need to perform the steps above as your printer will be mapped after a fresh login again
== Arange Windows Side-by-Side ==
Windows 2016 allows for easy side-by-side alignment of windows:

 1. click on the first window to be aligned
 1. press the "Windows" key (left/right and near the Space bar) and keep it pressed. Then press the Cursor Left key. The window will be aligned to the left side of the screen
 1. click on the second window to be aligned
 1. press the Windows" key and keep it pressed. Then press the Cursor Right key. Both windows are now aligned side-by-side (see below for example)

{{attachment:side-by-side.png}}

== Sound and Video ==
Sound and video is working, but performance may depends on the current bandwidth available

== USB sticks ==
 * If you plug in a USB Stick at the terminal, there is '''no window''', which opens automatically.
 * Plugged in USB sticks or ext. Harddrives will appear in your home-directory under the folder '''thindrives'''.
 * Open a 'explorer' and navigate to '''this PC -> media on ThinLinc '''
 * Mount and unmount happens automatically - wait a few seconds.
 * If you copy data, wait until the light on the USB stick '''stops''' flashing or the '''progress bar''' disappear, plus some additional seconds. After that, it's secure to remove the stick.
 * If the stick does not appear under directory 'media on ThinLinc', please trigger a remount via menu on your Thinlinc Terminal (not on Windows) '''Applications > System Tools > Repair thindrives (USB Stick , ...) '''.
 * Note: on the Thinstations (they have a an orange startup screen) the USB Stick mount is not yet support

== Screenshot ==
 * https://www.heise.de/ratgeber/Die-Screenshot-Funktionen-in-Windows-10-und-11-6266290.html

Windows 2016

First Time Login

If your IMATH account has been created before March 1st, 2014, you have to synchronize the Windows password for Windows 2016 before you can log in. This has to be done only once per account.

Follow the steps below in order to synchronize the password:

  1. go to https://www.math.uzh.ch/newpw

  2. enter your user name and password for your IMATH account, and press Login

  3. check the option Keep my old password and leave the fields New password and Retype new password empty.

  4. press Set password. It may take up to 60 seconds for the change to happen.

Once you finished above steps, your password has been synchronized and you can log into Windows 2016 using your IMATH account.

Where are the Applications?

  1. Click on the Windows logo in the lower left hand corner
  2. You will see the Start Screen with a limited set of applications as shown below
  3. By scrolling on downwards you will find all applications

win2016_apps.png

Where are the Files?

Start Windows Explorer (circled red)

2.png

Your personal data (home) is in \\peuler2\<shortname>

Double-click the Path bar and insert the above. Note that <shortname> needs to be replaced with your shortname. (circled red below)

3.png

Shared data on Scratch is in \\peuler2\s

4.png

How to lock your Home aswell as the shared folder in place

Right-click Network and press "Map network drive":

5.png

Shared Folder

Set S: as the Drive name and insert \\peuler2\s

6.png

Home Folder

Set L: as the Drive name and insert \\peuler2\<shortname>

7.png

Once done, it should look like this:

9.png

Sign Out/Log Out

In order to sign out/log out, i.e. close all programs and end the sessions

  1. click on the Start Button
  2. then click on the personalized icon (left side, see pink arrow)
  3. a drop down list appears. Click on Sign out.

win2016_windows_sign_out.png

Printer

all Institute printers should be automatically mapped to your windows session.

1. Trouble shooting

in case your selected printer disappeared after you disconnect/ reconnect your session

define your default printer

at first start-up please define you default printer as follow

  • click in on the windows icon and type "devices"

win2016_printer_device.png

  • navigate to "Printers & Scanners"

  • Select your required Printer and click on "Manage"

win2016_printer_choose.png

  • click "Set as default" to assign this printer as default printer for all your applications

win2016_printer_setdefault.png

Arange Windows Side-by-Side

Windows 2016 allows for easy side-by-side alignment of windows:

  1. click on the first window to be aligned
  2. press the "Windows" key (left/right and near the Space bar) and keep it pressed. Then press the Cursor Left key. The window will be aligned to the left side of the screen
  3. click on the second window to be aligned
  4. press the Windows" key and keep it pressed. Then press the Cursor Right key. Both windows are now aligned side-by-side (see below for example)

side-by-side.png

Sound and Video

Sound and video is working, but performance may depends on the current bandwidth available

USB sticks

  • If you plug in a USB Stick at the terminal, there is no window, which opens automatically.

  • Plugged in USB sticks or ext. Harddrives will appear in your home-directory under the folder thindrives.

  • Open a 'explorer' and navigate to this PC -> media on ThinLinc

  • Mount and unmount happens automatically - wait a few seconds.
  • If you copy data, wait until the light on the USB stick stops flashing or the progress bar disappear, plus some additional seconds. After that, it's secure to remove the stick.

  • If the stick does not appear under directory 'media on ThinLinc', please trigger a remount via menu on your Thinlinc Terminal (not on Windows) Applications > System Tools > Repair thindrives (USB Stick , ...) .

  • Note: on the Thinstations (they have a an orange startup screen) the USB Stick mount is not yet support

Screenshot

PublicMathWiki: Windows2016 (last edited 2024-03-27 11:22:45 by alrutz)