linux Printing via UZHPrintPlus Offical ZI Page: UZH Print Plus Recommended for students. Printing is possible via WLAN UZH, but not via WLAN EduRoam. Printing via MATH/DM3L-Print server Recommended for institute members.  Printing is possible via LAN aswell as WLAN UZH & EduRoam IMATH-Account required.  Create I-MATH Account Adding Printers Institute Info: Insitute Printers are the ones named after certain rooms (where the printer is located) e.g k30, j11 etc. Add Printer: Open a Terminal and type the following command:  Make sure to insert the real printer name (e.g "k30") in the place holder sudo lpadmin -p -E -v ipps://print-mac.math.uzh.ch:443/printers/ -m everywhere UPP  Info: UPP Printers are the ones located on k and j floor (public) e.g k, j, kcolor, jcolor  Add Printer: Open a Terminal and type the following command: Make sure to insert the real printer name (e.g "kcolor") in the place holder   sudo lpadmin -p -E \ -v ipps://print-mac.math.uzh.ch:443/printers/ \ -m raw \ -o auth-info-required=username,password Authentication Info: Both Institute & UPP Printers require LDAP-Authentication in order to print. (IMATH-Credentials) Authenticate: After adding a printer, the first print-job will not ask to authenticate (won't print), just print it again. On the second attempt, you will be prompted for your IMATH-Credentials (shortname+password: same as for MY, MADE, Thinlinc) Make sure to tick the box "Remember password", so you will never be prompted for credentials on this printer again. Booklet Printing Only available on specific UPP Printer-Queues (jcolor_booklet & kcolor_booklet) 1.) Add the following printer:  jcolor_booklet or kcolor_booklet (Adding UPP Printers) Important: jcolor or kcolor will not work, it has to be the booklet queue! 2.) After the printer is added and you are in the Print Dialog, make sure you set the following: Paper Setup: A4 Do NOT select "Booklet" under Handling - Print it as if it was a regular File. Troubleshooting You may have discovered that all the Institute Printers are listed in the print-dialog "General"- Tab, even if you haven't added them. Printing on them will not work, since there is no way to authenticate!