location: Diff for "SeminarLive Manual"

Institute of Mathematics - PublicMathWiki:

Differences between revisions 16 and 17
Revision 16 as of 2021-09-29 14:00:21
Size: 8924
Editor: pgroeb
Comment:
Revision 17 as of 2021-09-29 14:01:46
Size: 8967
Editor: pgroeb
Comment:
Deletions are marked like this. Additions are marked like this.
Line 92: Line 92:
 * d) '''Show Devices in the Room''' such as Blackboard Camera, Ceiling Microphones, etc. By turning a switch, each device can be turned on / off individually.  * d) '''Show Devices in the Room''' such as Blackboard Camera, Ceiling Microphones, etc. By turning a switch, each device can be turned on / off individually. This option is only available to the host.

Setup

Before an event (e.g. a lecture) can be streamed with SeminarLive, it needs to be created and configured on https://seminarlive.math.uzh.ch. I-MATH lectures and exercises can be automatically imported, other events need to be created manually. The following two chapters show how to import events and how to create them manually.

Log in at https://seminarlive.math.uzh.ch/semlive/index.php?id=login with your UZH account. If you do not have a UZH account, use the https://seminarlive.math.uzh.ch/semlive/index.php?id=registration to create a SeminarLive account and then log in with this account.

Event Import

  1. Navigate to the My Events page (https://seminarlive.math.uzh.ch/semlive/index.php?id=my_events)

  2. If you have one or more events that can be imported (I-MATH lectures and exercises), you will see them as shown in the image below.
    • event_import.png

  3. Click 'Import'. You will now see the event in a table. You can click its edit button to adjust any settings. Editing the event will open the same form as shown in the next chapter.

Creating an Event

To create an event manually, follow these steps

  1. Navigate to the My Events page (https://seminarlive.math.uzh.ch/semlive/index.php?id=my_events)

  2. Click on the Create Event link. If you already have at least one event listed on the page, use the + button instead.

    • If you see neither the link nor the button, then you are most likely missing privileges - in this case please contact support.math.uzh.ch.
  3. The form shown in the image below below appears.
    • create_event_general.jpg

    • a) Type: The type of event: Lecture, Exercise or Seminar. If you pick exercise, then you will also have to select the lecture or seminar for which the exercise is done.

    • b) Semester: The Semester in which you want to stream.

    • c) Module: The module name of your lecture

    • d) Default Room: The room in which the event is usually held. The room can later be adjusted per occurrence of the event, but by default the Default Room will be used.

    • e) Lecture Name: The name of the lecture

    • f) Description: An optional description of the event (e.g. what is the lecture about?

    • g) Show on "Browse Events": If this box is checked, then your event will be publicly visible on the Browse Events page (https://seminarlive.math.uzh.ch/semlive/index.php?id=browse_events)

    • h) Speakers: All speakers for the event are shown here. When you save the event for the first time, you will be automatically added to the speaker list. After this, you will be able to add more speakers. All Speakers can edit the event and will automatically be granted all privileges on the Streaming Interface of the event. (e.g. Turning the blackboard camera and other devices on/off)

Streaming and Recording Settings

In the tab Streaming you can adjust the following settings:

create_event_streaming.jpg

  • a) Stream this event live?: not implemented - livestream is enabled for all events.

  • b) Who has access to the livestream?: Note that multiple options can be selected. Only one of them needs to be true to grant access to a user

  • * Anyone: Anyone will be able to access the stream

  • * Logged in users: People can only access the livestream after they have logged in on SeminarLive

  • * Users who know the password: If you check this box, you will see a field where you can enter a password. People will be prompted to enter the password before they have access to your stream.

  • c) Record stream: Whether or not the stream should be recorded. Please note that although streams can already be recorded, playback is not yet possible.

  • d) Who has access to the recordings?: Note that multiple options can be selected. Only one of them needs to be true to grant access to a user

  • * Anyone: Anyone will be able to watch the recordings

  • * Logged in users: People can only watch the recordings after they have logged in on SeminarLive

  • * Users who know the password: If you check this box, you will see a field where you can enter a password. People will be prompted to enter the password before they can watch the recordings.

  • e) Automatically publish recordings: not implemented - Whether the recordings should be automatically published or not

Creating a Schedule

In the tab Schedule you can now define when exactly the event will be held. At the moment there are no occurrences of this event.

create_event_schedule_empty.jpg

Click the + Button to create the first occurrence of the event. Then configure the occurrence (which is called a meeting here):

create_meeting.jpg

  • a) Name: By default this is the same as the event's name. However, you might want to enter a keyword that describes what exactly the lecture is about on that specific date.

  • b) Room: By default this is the Default Room you have set before on the Event. Select another room if the event does not take place in the default room on that date.

  • c) Start: Date and time when the event starts

  • d) End: Date and time when the event ends

Save the form. You should now see your event:

create_event_schedule_1.jpg

Let's assume the event should occurr once a week, for 14 weeks. At the moment there is only one occurrence. To create the remaining occurrences, edit the meeting (Pencil icon) and then switch to the Recurrence tab.

meeting_recurrence.jpg

Click Repeat this meeting. The form in the image below will open. To create the remaining 13 occurrences of the event, configure the as shown:

meeting_recurrence_2.jpg

Once this form is saved, multiple meetings are created using the chosen options. You will land on the Detail page of your event. If everything went right, you should see this message:

meeting_recurrence_3.jpg

Streaming Interface

The streaming interface for SeminarLive looks and works as shown and explained below.

streaming_client.jpg

  • a) Mute / Unmute yourself. The first time you unmute yourself, your browser will ask for permission to access your microphone. Confirm this with yes. When you are unmuted, you can also adjust your own volume.

  • b) Share your camera (e.g. built in camera of a laptop/mobilee device or a webcam)

  • c) Share your screen. You can share multiple screens simultaneously. Please note that screensharing might not be possible on tablets and mobile phones.

  • d) Show Devices in the Room such as Blackboard Camera, Ceiling Microphones, etc. By turning a switch, each device can be turned on / off individually. This option is only available to the host.

  • e) Raise Hand. Click this to signal that you have a question. Other participants will see the hand icon next to your name. You can click it again to lower the hand. The host of the meeting is able to lower any hands.

  • f) Follow Speaker. If you turn Follow Speaker mode on, then you will always see the stream which is currently selected by the speaker. This is useful if the speaker is using multiple streams (e.g. Camera, Blackboard, ...) to explain something. If this is turned off, then you will have to manually click on a stream's thumbnail to see it in high quality.

  • g) Show/Hide Participant Panel Click this to show/hide the panel with all participants in the top right.

  • h) Show/Hide Chat Panel Click this to show/hide the chat.

  • i) Leave Meeting Leave the meeting and return to the previous page

  • j) Enter Fullscreen. Leave Fullscreen by cliicking the icon again or by hitting ESC.

  • k) Search Participant in the list below

  • l) Participant Panel Settings Contains an option to quickly expand/collapse all stream thumbnails. More options will come in the future.

  • m) Shows the Role of a participant. White speeach bubble = Speaker, golden speech bubble = host.

  • n) Mute or unmute another user. This has no effect for other participants, only for yourself.

  • o) Participant Settings. Contains multiple settings: Adjust volume of participant, grant/revoke speaker privilege (Host only), more settings in the future.

  • p) Thumbnail. The thumbnail of a stream that is shared in the meeting. Thumbnails appear for cameras and screenshares. They can be clicked to display the high quality stream. The arrow symbol in the top right corner of the thumbnail can be clicked to expand or collapse the thumbnail.

  • q) Chat

PublicMathWiki: SeminarLive Manual (last edited 2023-07-15 09:58:00 by crose)